Categories
Plamo Review

Review: HGUC Sazabi

HGUC Sazabi-003

For a man dubbed as the “Red Comet”, Char Aznable’s mobile suits really aren’t all that red. His One Year War suits had a whole lot of pinkish red, but not quite red red. It’s not until Zeta Gundam when Char Quattro Bajeena finally gets a red mobile suit in the form of his custom Rick Dias, but he soon passed that off to the grunts after opting for the blinged-out glory of the Hyakku Shiki. Only after two ideological 180’s does Char (now the leader of the new Neo Zeon faction) finally gets his definitive red machine – the MSN-06 Sazabi.

Though heavily armed and armoured, due to the lightweight material and numerous high-powered thrusters on the Sazabi, the suit is able to achieve a remarkable level of maneuverability. Though between the beam shotrifle and the torso-mounted mega particle gun, the Sazabi has no shortage of way to dispose of its enemies. Its most devastating armament is the 6 funnels carried on its back, which are small, high-powered remote weapons controlled directly through the pilot’s mind. Think the interceptors of a Protoss carrier in StarCraft – they’re like space piranhas that shoot lasers out of their mouths.

As an ardent U.C. Gundam fan, I can’t help but to succumb to Char fever, and the HGUC Sazabi was just what the doctor ordered to this ailing patient. And though the prescription is not without a couple of side effects, the HGUC Sazabi certainly lives up to the legacy of the Red Comet.

First Impression

HGUC Sazabi-008

HGUC Sazabi-009

When the source of the model’s design comes from a 22-year-old movie, the question of accuracy is a tricky one to tackle. In general, the design for this HGUC kit plays down on the bulkiness of the torso and head while bulking up the legs and feet. By shifting the bulk from the torso, the HGUC Sazabi has a sharper and slimmer appearance than the Master Grade and anime portrayals. I imagine that different people would receive these alterations differently, but personally I am in favour of this revision, as it gives the suit a leaner, speedier feel.

While this may escape the initial observation, the red on Sazabi’s armour actually comes in two tones. The difference between them is minute, but it’s enough to keep this red bruiser from a dull, flat appearance.

HGUC Sazabi-017

The grey parts in this model have a slightly reflective finish. These parts are used for the major limb joints and hands, which lead me to assume that they’re supposed to represent magnetic coating or something to that effect.

HGUC Sazabi-031

Oh, in case you didn’t know, the Sazabi’s huge. As evident in the picture above, it makes the RX-78-2 its bitch with sheer bulk. Though it’s not quite as tall as a regular MG, its width gives it sense of presence that rivals the 1/100 scale kits.

Closer Look

HGUC Sazabi-014

The HGUC Sazabi is very respectable in terms of colour accuracy. I was glad to see that even the small yellow verniers on the shoulders enjoy the colour separation treatment. The only stickers included are for the green mooneye, the Neo Zeon crest on the shield, and the symbol on its front tasset armour that looks like a G-clef. With these stickers, the kit will look fine as it is out of the box, but if you are attentive to small details, there are a number of alterations you can make here and there.

HGUC Sazabi-034

HGUC Sazabi-033

There are a number of parts that did not get the colour separation treatment. These include the black midsection of the beam tomahawk, the red energy cable on the beam shotrifle, the yellow ridge on the bottom half of the shield. These are pretty easy to tackle with rudimentary means such as a gundam marker. If I could manage it, so can you!

HGUC Sazabi-010

HGUC Sazabi-011

In addition to those details, I also painted a few thrusters and vents on Sazabi’s crotch and back tasset yellow. But while these places are painted yellow on the photos in the instruction manual, they are actually red in the movie. So the choice is yours: if you want to be true to the movie, less work for you, but if you want to add a few touches of yellow to break up the big patches of red on the Sazabi for some stylistic flair,

HGUC Sazabi-016

HGUC Sazabi-018

HGUC Sazabi-015

Of course, the biggest colour issue in this kit lies in the various thrusters on the shoulders, hips, and legs. The portions inside the thruster nozzles are supposed to be yellow, but asides from the MG Kampfer, I do not know of any other gunpla kits that feature colour separation between the inner and outer nozzle – not even the pricey MG Sazabi. Due to the sheer number nozzles on the Sazabi, painting the interior of the nozzles would make a significant impact on the appearance of the model as a whole. As you can tell, I’ve skimped on the paint, but since I still have the can of yellow paint I bought for the MG Master Gundam, I just might tackle the Sazabi again in the future.

Accessories

HGUC Sazabi-038

HGUC Sazabi-037

The beam shotrifle is of a very simple 3-piece construction. The pump grip isn’t articulated, but I doubt you’re expecting it to.

HGUC Sazabi-024

HGUC Sazabi-026

HGUC Sazabi-006

HGUC Sazabi-005

HGUC Sazabi-007

The Sazabi comes with three melee beam weapons: a pair of beam sabers and a beam tomahawk, the latter of which comes with effect parts for both the beam saber configuration and the tomahawk configuration. Unlike the MG, the HGUC Sazabi stays true to the movie by with clear yellow effect parts as opposed to clear green. Another great thing about the beam parts is that instead of being perfectly smooth, the base of the blades actually have little “teeth”, which makes them actually look like the powerful energy weapons instead of coloured glass.

Because the ends of the beam sabers are moulded into the arm itself, there is no way to store the beam sabers hilts in Sazabi’s wrists. The beam tomahawk’s retractable handle is also lost in translation to a smaller scale. Thankfully, neither of these two changes are all that glaring.

HGUC Sazabi-022

HGUC Sazabi-023

Sazabi’s oversized shield is able to store the beam tomahawk at its centre, as well as three missiles at its tip. However, its massive weight and bulk do present a number of problems.

HGUC Sazabi-029

HGUC Sazabi-028

The shield is attached to the arm via the mounting component. It can either be attached to the back or the side of the arm. But because of the largeness of Sazabi’s shoulders, the shield would inevitably bump into them, especially if mounted to the side of the arms. As such, it may be frustrating, if not impossible, to reproduce some poses.

Further compounding the problem is the shield’s weight, which is enough to drag the entire arm down after some play. Though these are more of an issue against the original design of the suit rather than the design of the kit itself the HGUC Sazabi nevertheless suffers from it.

HGUC Sazabi-025

HGUC Sazabi-021

Finally, the HGUC Sazabi comes with twelve funnels. Half of these are in the storage configuration. These come in 2 sets of 3 and are stored in Sazabi’s backpack. The other half are in the open deployed configuration. However, unlike the HGUC Jagd Doga kits that came before it, the HGUC Sazabi does not come with the clear plastic pipes design to display the deployed funnels. Knowing Bandai, this is a completely intentional bitch move trying to make me buy the Jagd Doga kits. But as much as I love the Sazabi, my hatred for Quess and Gyunei supersedes it. Tough luck, Bandai~

Articulation

HGUC Sazabi-019

HGUC Sazabi-035

As a chunky mobile suit, the HGUC Sazabi does not boast amazing articulation by any stretch of the imagination. But then again, it doesn’t need to. The Sazabi is designed solely for space combat, so it doesn’t need run or walk. Ever. If not for Char’s love of kicking people, I would have questioned the point of having legs in the first place. As such, the articulation in this kit should be sufficient for all of your needs, but here are a couple of highlight that you may find interesting.

HGUC Sazabi-012

HGUC Sazabi-013

The mono-eye of the HGUC Sazabi is articulated. To change its position, simply pop off the top and manually turn the wheel to which the tiny eye is attached.

HGUC Sazabi-020

The HGUC Sazabi features a double-jointed neck. The top joint is your standard ball joint, but the bottom is a very generous pivot joint that allows the neck to be swung pretty far back for those in-flight poses.

HGUC Sazabi-036

The funnel brackets and propellant tanks on the backpack of the Sazabi are also completely articulate. The brackets can be tilted up and down as well as side to side, and the tanks are attached via ballpoints, so they can wiggle all over the place.

On a negative note, the legs pop off from the hips wayyyy too easily. Because of how shallow the ball joints are, there is no definitive “pop” when you attach the leg onto the hips, and hence they will come loose when you fiddle with the legs, eventually detaching from the hips completely. You can easily pop them back on, but be prepare to do so many, many times if you ever plan to play around with the completed model.

Final Say

HGUC Sazabi-001

As I took the photos for this review, I was subject to a conflict of emotions. During the process I have recalled the reasons why I loved this kit. It’s a handsome redesign of an iconic suit, packed with very decent articulation and detailed beam effect parts. With its intimidating red colour scheme and considerable bulk, the HGUC Sazabi looks great in virtually any pose you put it in. Sure, it could’ve used a more secure set of hips and a set of clear bendy tubes for the funnels, but those issues are but minor kink to the best plamo rendition of the red giant out there. If you love the Sazabi, then this HGUC kit should be a no-brainer.

HGUC Sazabi-002

At the same time, putting my badly top-coated Sazabi under a macro lens truly made my heart bleed. Want to know what happens when you skimp too much on the top coat? Well, here it is. Because the coating is barely there, not only is the plastic sheen still visible on the surface of the plastic, but there’s also tiny specks all over the place. Now that the Sazabi has seen at least a year’s worth of dust, I wonder if it’d be a good idea to add another layer of top coat at this point in time. Well, I’ll find out soon enough – look forward to an update on this in my Real Grade RX-78-2 review!

HGUC Sazabi-030

HGUC Sazabi-032

Pros

  • It’s big, it’s red, and it’s mean-looking
  • Accurate and detailed beam effect parts
  • Impressive amount of colour separation – looks great right out of the box
  • Decent articulation

Cons

  • Shield is heavy and cumbersome
  • No display parts for the funnels
  • Legs pop off too easily

16 replies on “Review: HGUC Sazabi”

that’s an impressive model Im a big fan of such bulky old school Gundams.
If I remember right I watched the OVA where it was in action .
You review pictures are very nice.

I built the Hygog and the RX-77 Guncannon model kits a few years ago,
but I’ve already stopped building model kits

If I’m not mistaken, the Sazabi only appears in the movie. Its slimmer and younger brother Sinanju did appear recently in the Gundam Unicorn OVA, though, so maybe you meant that? Regardless, thank you for your compliment! =)

mhh, It wasn’t unicorn
I guess it was an old movie called Char’s Counterattack or something like that
im no gundam universe expert so I dont really know;D

Hey, I’m building the RG Gundam as well! Well, I WAS building it, and would have finished if I didn’t screw up on an important waterslide decal along the way. I’ve put too much work into this kit to brush it off (to give you an idea: I listened through an entire Jane Austen audiobook while applying these decals). I’m currently waiting for the replacement to arrive in the mail. Can’t wait to get this bad boy finished and reviewed.

Always loved the Sazabi (Shotguns FTW)…Meant to get the MG, but I stopped the hobby before I got around to picking it up…If I ever had the money I’d pay someone to make me one of the G-system ones these days though! Mmmm mecha porn…

Suddenly feel the need to go pop in my CCA dvd…

“If I ever had the money”…now there’s a open-ended hypothetical if I ever saw one. Oh the things I would do with money… I’d probably have enough shipping boxes to build a fort at by the end of my initial spending spree.

The Sazabi sure is a nice machine. Though, after the second Unicorn OVA, I only have eyes for the Sinanju right now.

I should really watch Char’s Counterattack sometime. I have a feeling the brief run-through of its story in Dynasty Warriors Gundam 2 is probably not as good as the original.

Yeah, I’d snatch up Sinanju in a heartbeat if I had any confidence in my ability to paint. I should get it regardless, since it seems that I won’t see any new loot until 2011, what with the delays that’s been thrown left and right.

Go watch Char’s counterattack. The action is brilliant and still puts must modern mecha shows to shame. Just don’t expect masterful storytelling — it’s pretty heavy-handed to some while outright awful to others. Still, it’s a great watch if only for the mecha porn.

Last Tuesday? What the shit? Hell, what daylight savings does to one these days. Just close your eyes for a second and then its like whoa, temporal distortion.
I seriously don’t remember what’s transpired between the period of November 1st to the 12th. This is also to do with my habitual expectation of weekend posts on HH, and thus that’s when I check.

Not two ideological 180s? Cuz y’know, an ideological 360 would lead you right back to where you started each time, so… Yeah.
To think, we’ll hardly ever see the level of Newtype warfare as in CCA ever again. Neither of them were at the height of Newtype psychic powars a la Kamille, but there’s some real professionalism in these two’s battles. Theirs is the epitome of Newtypes dueling in high-performance suits; forevermore will we have to see fresh new boy protagonists fumble with their fancy new suits and the space opera like virgins with their privates. Of course, alternate universes don’t count.
Personally it’s a shame the greatest UC rivalry ended on such an ambiguous note, though that may be for the better.
It’s cool that there’s detail as far as the monoeye rail and the teeth on the saber on this one. Still, I’ll always prefer the Nightingale – so much more sinister. I see it and the Hi-Nu as a leveled up CCA, but that’s probably just my bias for symmetry talking. And really man, funnel display parts wherever funnels are, in Bandai plamo? We’re sooner to have Christmas twice a year. That said, I’ve now a sudden urge to go watch the three original movies again, just to hear Ai Senshi in context.

See, this is the Canadian dust I was talking about. A very real threat to hobbyists everywhere.

Okay, this is officially super-strange — I’m not getting any email notifications of any of your comments. I get notification from other people, just not you. I’ve checked my spam folders and settings, but to no avail. Time to knock on some customer service wood. Don’t you use RSS feeds, btw? Manually checking websites is SO last decade. I really hope that most of my readers use RSS, because the continual disappointment from the lack of updates would drive away my already humble reader base.

I wonder how deep Sunrise can dig into the UC Goldmine. Is there room for another full-fledged Saga? Or are we forever doomed to side stories? I really think Gundam needs to open up a new page of its hard sci-fiction mythos that people can really invest themselves into, and though I enjoyed 00 overall, it really doesn’t have what it takes for me to INVEST myself into it, especially when you have TEAM AMERICA for its protagonists.

Pfft, the dust may be bad, but it’s still no excuse to stuff your figures into boxes like that. Removing dust from uneven sprayed surfaces may be a bitch, but it’s not an issue for the smooth finishes of PVC figures. LET THE MIKUS OUT OF THEIR CAGE, YOU MONSTER.

Nice Sazabi here, Chag !
I’ve built one a few month ago, and I painted it a bit more than you (gold in the thrusters, black under the shoulders, etc). You may see it on flickR !
I struggled a bit more than you with the yellow painting, as I’m using Citadel paint (not markers) and had hard times covering the black of the shield and red parts of the skirt.
I sometimes consider buying some markers, because they seem to give better result than paint without priming.
With paint, I’m forced to prime with white paint (because I don’t see myself using primer spray cans for tiny bits of paints, I’m not confident with masking), and that sometimes makes a thick layer of paint …
I also had the same problem you had with top coat, but that was because my can was empty. The Sazabi is a pain to top coat, I think, because there’s a lot a part that cover others, etc (damn legs !).
Plus, I top coated it BEFORE making panels lines and water decals (which I still have to order …). Very stupid from me =P

Ooo, I love what you did with the backpack of your Sazabi! The silver bolts and vents are a fantastic touch, as well as the gold nozzles. They make world of difference when it comes to spicing up that backpack with some contrast. Nice job!

Gundam markers are never the best option, but they’re certainly an easy one. However, when you are applying a lighter colour onto a darker base, it does take multiple coats to achieve the desired effect, which means the layer of paint may be end up pretty thick. Also, the paint takes a long time to dry completely, so it takes a good amount of patience.

Yikes, you panel lined before waterslides? What are you going to do about that? From what I hear, waterslides do not take kindly to uneven surfaces, though I don’t know the exact nature of such a complication. Are you just going to slap them on top and wish for the best?

Well, I intend to remove the flat top coat with light grit sandpaper for the parts where I’m going to place water decals. But because there’s a large amount of pieces, I’m only going to do the shield and skirt decals (thus replacing stickers).

For the panel lines, I think the flat top coat shouldn’t be much of a problem, because I’m using Gundam Real Touch Markers, which are easily cleaned with a coton bud or (and best) an eraser.

Leave a Reply to wieselhead Cancel reply

Your email address will not be published. Required fields are marked *